Optical filter sourcing guide
Use the POF-1100L programmable optical filter as a practical starting point for lab wavelength control: confirm the band range, bandwidth, attenuation, and interface while comparing optical filter manufacturer options and programmable optical filter manufacturer support.
Use the visible POF-1100L listing to frame a first inquiry: band range, bandwidth, attenuation, interface, enclosure, and switching notes are the details that can be checked before deeper engineering discussion.
| Product identity | Programmable Optical Filter POF-1100L |
|---|---|
| Filtering platform | LCOS-based programmable optical filter for high-resolution modulation and wavelength selection. |
| Working wavelength range | 1572.681 nm to 1626.434 nm, covering the C-band and L-band scope described on the product page. |
| Filter bandwidth | 8 GHz to 6 THz, with ±0.1 GHz bandwidth resolution listed by Moropto. |
| Programmable attenuation | 0 to 30 dB programmable attenuation for spectral shaping and channel control. |
| Switching and signal notes | The product page lists sub-500 ms setting time, high extinction ratio, and return loss values each at ≥30 dB. |
| Mechanical and interface notes | 302 mm x 250 mm x 116 mm enclosure, 2.5 kg weight, USB communication, and standard FC/APC optical interface. |
Test-bench guide
Start with the decision that matters most for the bench, then move from product confirmation to control planning and a focused technical message.
Use this card when the first task is product identification and basic fit for a C/L-band bench.
Use this card when the next question is how much spectral control the setup needs.
Use this card when visible page facts are enough to prepare a first technical message.
Helpful reading
Use these Moropto articles to compare filtering context, laboratory use, and application fit before opening a detailed inquiry.
This Moropto article discusses programmable optical filters for industrial testing, including bandwidth resolution and fast tuning context.
Read Industrial Testing Guide
This official overview frames compact programmable optical filters for laboratory use and optical communications research.
Read Laboratory Overview
This Moropto article connects LCOS-based programmable filtering with dynamic wavelength selection, attenuation, and photonics research needs.
Read Application ArticleReview cues
The listed 1572.681-1626.434 nm range is the first practical filter for deciding whether the POF-1100L belongs in the evaluation set.
The page gives both an 8 GHz-6 THz filter bandwidth and 0-30 dB programmable attenuation, so inquiry notes should ask about each separately.
USB communication, FC/APC interface, 302 mm x 250 mm x 116 mm enclosure, and 2.5 kg weight all affect test-bench planning.
Before inquiry
The Moropto product page lists a working wavelength range from 1572.681 nm to 1626.434 nm for the POF-1100L.
The product page lists USB for programming and control, plus a standard FC/APC optical interface.
Start with the official POF-1100L page, then use Moropto's contact route for wavelength, attenuation, and integration questions.
The product page lists an 8 GHz to 6 THz filter bandwidth and ±0.1 GHz bandwidth resolution.
The product page lists 0 to 30 dB programmable attenuation. Match that visible range against the planned spectral shaping and channel-control work.
The product page lists a 302 mm x 250 mm x 116 mm enclosure and 2.5 kg weight, so bench space and handling should be checked before integration.
Open the product page, compare the listed wavelength and bandwidth details, and contact Moropto with the application requirements that need confirmation.
